Madras Agricultural Journal
Loading.. Please wait
Research Article | Open Access | Peer Review

Prototype Design of Paddy Straw Biomass Combustor for Water Heating

Volume : 104
Issue: Jul-sep
Pages: 265 - 268
Download

Abstract


An innovative prototype design of paddy straw biomass combustor with pilot fuel injection system has been developed and tested for boiling of water at domestic level. The innovation of mixing pilot fuel (diesel) intermittently (in small quantity) with blower air helped in flame sustainability to achieve complete combustion. A cylindrical furnace with conical top was designed for exit of flue gas from the top where a vessel containing 2 L of water was placed, which started boiling within 3 min and used for making tea. Experimental trials showed that each 3 kg bale took about 6-7 min for complete burning by achieving the flue gas temperature between 329 and 354°C. During the 8-10 h operation, the designed combustor had the potential for boiling rice and pulses at domestic level. The combustor could heat 40L of water per hour by utilizing about 250 kg of paddy straw and 120 ml of pilot fuel.

DOI
Pages
265 - 268
Creative Commons
Copyright
© The Author(s), 2026. Published by Madras Agricultural Students' Union in Madras Agricultural Journal (MAJ). This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium, provided the original work is properly cited by the user.

Keywords


Bale Combustor Forced draft Grate shaker Paddy straw Pilot fuel
footer

© Madras Agricultural Journal. Website design – All rights reserved.